供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The MIC284 is a versatile digital thermal supervisor capable of measuring temperature using its own internal sensor and an inexpensive external sensor or embedded silicon diode such as those found in the Intel Pentium III? CPU. A 2-wire serial interface is provided to allow communication with either I2C or SMBus masters. Features include an open-drain over-temperature output with dedicated registers for implementing fan control or over-temperature shutdown circuits. Interrupt status and mask bits are provi

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：具有 N 因数和串联电阻校正的 ± 三路远程和本地温度传感器 8-SOT-23 -40 to 125

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：硬件监控器，带风扇控制功能和 6 个电源电压监控器 24-TSSOP 0 to 125

供应商：自营(DL0001)

说明：The MIC384 is a versatile digital thermal supervisor capable of measuring temperature using its own internal sensor and two inexpensive external sensors or embedded silicon diodes such as those found in the Intel Pentium III* CPU. A 2-wire serial interface is provided to allow communication with either I2C** or SMBus* masters. The open-drain interrupt output pin can be used as either an over-temperature alarm or a thermostatic control signal. Interrupt mask and status bits are provided for reduced software

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：Microchip's ?AT30TS74 temperature sensor is capable of measuring and converting temperatures from -55?C to +125?C to a digital word and provides a typical accuracy of +-1.0?C over the operating temperature range of -20?C to +100?C. The device is factory calibrated and requires no external components to help provide a cost effective solution. To reduce current consumption and save power, the AT30TS74 features a shutdown mode which turns off all internal circuitry except for the internal power-on reset and se

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：Microchip Technology Inc.’s MCP98243 digital temperature sensor converts temperature from -40°C and +125°C to a digital word. This sensor meets JEDEC Specification TSE3000B3 Mobile Platform Memory Module Thermal Sensor Component. It provides an accuracy of ±0.5°C/±1°C (typical/maximum) from +75°C to +95°C.