供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：具有 SMBus 接口、采用 β 补偿技术、适用于 65/90nm 处理器二极管的 ±0.75℃ 远程和本地温度传感器 8-VSSOP 0 to 90

供应商：自营(DL0001)

说明：具有 N 因数和串联电阻校正的 ± 三路远程和本地温度传感器 8-SOT-23 -40 to 125

供应商：自营(DL0001)

说明：带华氏刻度的 ±1°F 5V 至 30V 模拟输出温度传感器 3-TO -45 to 148

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The MIC281 is a digital thermal sensor capable of measuring the temperature of a remote PN junction. It is optimized for applications favoring low cost and small size. The remote junction may be an inexpensive commodity transistor, e.g., 2N3906, or an embedded thermal diode such as found in Intel Pentium* II/III/IV CPUs, AMD Athlon* CPUs, and Xilinx Virtex* FPGAs. The MIC281 is 100% software and hardware backward compatible with the MIC280 and features the same industry-leading noise performance and small

供应商：自营(DL0001)

说明：Microchip's ?AT30TS75A temperature sensor is capable of measuring and converting temperatures from -55?C to +125?C to a digital word and provides a typical accuracy of +-0.5?C over the operating temperature range of 0?C to +85?C. The device is factory calibrated and requires no external components to help provide a cost effective solution. To reduce current consumption and save power, the AT30TS75A features a shutdown mode which turns off all internal circuitry except for the internal power-on reset and ser

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The EMC1824 is a 1.8V, 4 channel, high accuracy, 2-Wire (I2C compatible) temperature sensor. Advanced features such as Rate of Change, Shutdown, Resistance Error Correction (REC), Beta Compensation (to support CPU diodes requiring the BJT/transistor model), and Ideality Configuration combine to provide a robust solution for complex environmental monitoring applications.The EMC1824 monitors is the first device family? to introduce rate of change functionality.? This data, in addition to the temperature itsel

供应商：自营(DL0001)

说明：TC622 and TC624 are programmable solid state temperature sensors designed to replace mechanical switches in sensing and control applications. Both devices integrate the temperature sensor with a voltage reference and all required detector circuitry. The desired temperature set point is set by the user with a single external resistor. Ambient temperature is sensed and compared to the programmed setpoint. The OUT and OUT outputs are driven to their active state when the measured temperature exceeds the progr

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：