供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The MCP9902 is a high accuracy, low cost, System Management Bus (SMBus) temperature sensor (shared data sheet with MCP9903 & MCP9904). Advanced features such as Resistance Error Correction (REC), Beta Compensation (to support CPU diodes requiring the BJT/transistor model including 45nm, 65nm and 90nm processors) and automatic diode type detection combine to provide a robust solution for complex environmental monitoring applications.The MCP9902 monitors two temperature channels (one external and one internal

供应商：自营(DL0001)

说明：支持 1.4V 电源电压、采用 WCSP 封装、具有 I2C/SMBus 的 ±2℃ 数字温度传感器 4-DSBGA -40 to 125

供应商：自营(DL0001)

说明：The EMC1402 is a high accuracy, low cost, System Management Bus (SMBus) temperature sensor. Advanced features such as Resistance Error Correction (REC), Beta Compensation (to support CPU diodes requiring the BJT/transistor model including 45nm, 65nm and 90nm processors) and automatic diode type detection combine to provide a robust solution for complex environmental monitoring applications.Each device provides ±1° accuracy for external diode temperatures and ±2°C accuracy for the internal diode temperature.

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：硬件监控器，带风扇控制功能和 6 个电源电压监控器 24-TSSOP 0 to 125

供应商：自营(DL0001)

说明：带华氏刻度的 ±1°F 5V 至 30V 模拟输出温度传感器 3-TO -45 to 148

供应商：自营(DL0001)

说明：TC622 and TC624 are programmable solid state temperature sensors designed to replace mechanical switches in sensing and control applications. Both devices integrate the temperature sensor with a voltage reference and all required detector circuitry. The desired temperature set point is set by the user with a single external resistor. Ambient temperature is sensed and compared to the programmed setpoint. The OUT and OUT outputs are driven to their active state when the measured temperature exceeds the progr

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：支持 1.4V 电源电压、采用 WCSP 封装、具有 I2C/SMBus 的 ±2℃ 数字温度传感器 4-DSBGA -40 to 125

供应商：自营(DL0001)

说明：NCT75 是一款两线串行连接可编程温度传感器，带高温/中断输出引脚，可发出超出限值状况信号。这是一个开路漏极引脚，可以比较器或中断模式运行。温度测量值使用一个高分辨率（12 位）、sigma-delta、模拟-数字转换器 (ADC) 转换为数字形式。该器件的运行温度范围为 -55°C 至 +125°C。 与 NCT75 的通信通过 SMBus/I2C 接口实现，该接口可兼容行业标准协议。三个地址选择引脚 A2、A1 和 A0 可用于将多达 8 个 NCT75 联接一个总线。通过此接口，可以访问这些 NCT75 内部寄存器。这些寄存器让用户能够读取当前温度、更改配置设置以及调节温度限值。 NCT75 具有 3.0 V 至 5.5 V 的宽电源电压范围。在 3.3 V 下的平均电源电流为 575 ?A。它还提供节能关断模式。典型关断电流为 3 ?A。NCT75 采用三种节省空间的封装 - DFN-8、 MSOP-8 和 SOIC-8，与 LM75 和 TCN75 可以实现引脚和寄存器完全兼容。

供应商：自营(DL0001)

说明：