供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The KSZ8061 is a family of single-chip 10Base-T/100Base-TX Ethernet physical layer transceivers for transmission and reception of data over unshielded twisted pair (UTP) cable. ?The KSZ8061 features Quiet-WIRE?internal filtering to reduce line emissions. ?It is ideal for applications, such as automotive or industrial networks, where stringent radiated emission limits need to be met. ?Quiet-WIRE can use low-cost unshielded cable, where previously only shielded cable solutions were possible. ?The KSZ8061 also

供应商：自营(DL0001)

说明：The KSZ8061 is a family of single-chip 10Base-T/100Base-TX Ethernet physical layer transceivers for transmission and reception of data over unshielded twisted pair (UTP) cable. ?The KSZ8061 features Quiet-WIRE?internal filtering to reduce line emissions. ?It is ideal for applications, such as automotive or industrial networks, where stringent radiated emission limits need to be met. ?Quiet-WIRE can use low-cost unshielded cable, where previously only shielded cable solutions were possible. ?The KSZ8061 also

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The KSZ8851 is a single-port controller chip with a SPI or 8-/16-/32-bit non-PCI CPU interface.Available in 32-/48-/128-pin packages, the KSZ8851 is for applications requiring cost-effective, high-throughput Ethernet connectivity in traditional embedded systems with MCUs or MPUs.KSZ8851SNL/SNLI: SPI interface, 32-pin packageKSZ8851-16MLL: 8-/16-bit host bus, 48-pin packageKSZ8851-16/32MQL: 16-/32-bit host bus, 48-pin package (-16MQL) or 128-pin package (-32MQL)The KSZ8851 is a single chip, mixed analog/digi

供应商：自营(DL0001)

说明：The Microchip LAN8810/LAN8810i is a low-power 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet physical layer (PHY) transceiver with variable I/O voltage that is fully compliant with the IEEE 802.3 and 802.3ab standards.The LAN8810/LAN8810i can be configured to communicate with an Ethernet MAC via the standard MII (IEEE 802.3u)/GMII(IEEE 802.3z) interfaces. It contains a full-duplex transceiver for 1000Mbps operation on four pairs of category 5 or better balanced twisted pair cable. Per IEEE 802.3-2005 stand

供应商：自营(DL0001)

说明：The KSZ8775CLX is a highly integrated, Layer 2-managed, five-port switch with numerous features designed to reduce system cost. It is intended for cost-sensitive applications requiring three 10/100Mbps copper ports, one RMII on Port 4, and one 10/100/1000Mbps Gigabit uplink port on Port 5.The KSZ8775CLX incorporates a small package outline, the lowest power consumption with internal biasing, and on-chip termination. Its extensive set of features include enhanced power management, programmable rate limiting

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The KSZ8862M is 2-port switch with fiber support, available in 8-/16-bit and 32-bit bus designs.The KSZ8862M is an industry first, fully managed, 2-port switch. It is based on a proven, 4th generation, integrated Layer-2 switch, compliant with IEEE 802.3u standards. For industrial applications, the KSZ8862M can run in half-duplex mode regardless of the application. In fiber mode, port 1 can be configurable to either 100BASE-FX or 100BASE-SX/10BASE-FL. The LED driver and post amplifier are also included for

供应商：自营(DL0001)

说明：The KSZ8692PB, KSZ8692PB-S is a highly integrated System-on-Chip (SoC) containing an ARM? 922T 32-bit processor and a rich set of peripherals to address the cost-sensitive, high-performance needs of a wide variety of high bandwidth networking and communications applications.The KSZ9692PB-S is a small package version of KSZ9692PB and it supports 16 bit DDR data width.Microchip's complimentary and confidential LANCheck? online design review service is available for customers who have selected our products for

供应商：自营(DL0001)

说明：The KSZ8091 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8091 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs, integrating a low-noise regulator to supply the 1.2V core and by offering a flexible 1.8/2.5/3.3V digital I/O interface.The KSZ8091MNX and KSZ8091MLX offer the Med