供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：HV850 is a high voltage electroluminescent (EL) Lamp Driver IC. It is designed to drive EL lamps of up to 1.5in2, with capacitive values up to 5.0nF. The HV850 converts a low voltage DC input to a high voltage AC output across an EL lamp. It uses a charge pump scheme to boost the input voltage, eliminating the need for external inductors, diodes, and high voltage capacitors, components commonly found in conventional topologies. The charge pump circuit discharges its energy into an EL lamp through a high vo

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：适用于 DLP553x-Q1 芯片组的 DLP 汽车数字微镜器件 (DMD) 控制器 324-BGA -40 to 105

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：DLP 0.33 1080p DMD 92-CLGA

供应商：自营(DL0001)

说明：HV859 is a high voltage driver designed for driving Electroluminescent (EL) lamps of up to 5.0 square inches. The input supply voltage range is from 1.8 to 5.0V. The device uses a single inductor and a minimum number of passive components. The nominal regulated output voltage that is applied to the EL lamp is ±105V. The chip can be enabled/disabled by connecting the resistor on RSW-Osc to VDD/ground. The HV859 has two internal oscillators, a switching MOSFET, and a high voltage EL lamp driver. The frequenc

供应商：自营(DL0001)

说明：The HV857L is a low noise, high voltage driver?designed for driving Electroluminescent (EL) lamps of up to five?square inches. It is the low noise version of the EL lamp driver?HV857. The input supply voltage range is from 1.8V to 5.0V. The?device uses a single inductor and a minimum number of passive?components. The nominal regulated output voltage that is applied?to the EL lamp is ±95V. The chip can be enabled/disabled by?connecting the resistor on RSW-Osc to VDD/ground.?The HV857L has two internal oscill

供应商：自营(DL0001)

说明：Digital controller for DLP6500FLQ, DLP6500FYE & DLP9000X/9000XUV digital micromirror devices< 676-FCBGA 0 to 85

供应商：自营(DL0001)

说明：HV860 is a high voltage driver designed for driving Electroluminescent, (EL), lamps of up to 5 square inches. The input supply voltage range is from 2.5 to 4.5V. The device uses a single inductor and a minimum number of passive components. Using the internal reference voltage, the regulated output voltage is at a nominal voltage of 110V. The EL lamp will therefore see ±110V. An enable pin, (EN), is available to turn the device on and off via a logic signal. The HV860 has two internal oscillators, a switch

供应商：自营(DL0001)

说明：HV853 is a high voltage, low noise EL (electroluminescent) lamp driver. It is the low noise version of the HV852 with improved EMI performance, operating over an input voltage range of 3.2V to 5.0V. It is designed to drive EL lamps of up to 1.5in2, with capacitive values up to 5.3nF. The HV853 converts a low voltage DC input to a high voltage AC output across an EL lamp. A nominal regulated output voltage of ±80V is applied to the EL lamp. It uses a charge pump scheme to boost the input voltage eliminating

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：